|
| |
MANICURE PRODUCT REFERENCE
LIST
CAT. REF. #
SWAY-GPNC-101 |
|
IMAGE OF THE PRODUCT |
Product
Identification & Classification |
 |
Technical Specification Sheet
for
SWAY-GPNC-101
Finger nail Clipper
Gold-Plated Curved-Lever
|
-
Product Name:
Classic Curved-Lever Fingernail Clipper
-
Brand Marking:
SWAY (Laser-engraved on the top contour of the lever arm)
-
Primary Application:
Standard fingernail grooming and precision manicuring
-
Design Style:
Sleek, low-profile ergonomic curved lever with fold-over swivel
pin
assembly
2.
Materials &
Surface Finish
-
Body & Lever Material:
High-Carbon Martensitic Stainless Steel grades:
420J2,
420HC, or 3Cr13 cold-forged/stamped spring steel)
-
Surface Coating.
Gold Titanium Nitride (TiN) PVD coating or Gold Electroplating
(High-gloss mirror finish)
-
Fulcrum Pin.
Solid machined stainless steel T-bar / ball-head swivel pin
(Gold PVD /
electroplated to match body)
3. Structural & Mechanical Specifications
-
Jaw Profile.
Standard curved crescent cutting edge designed to follow
natural nail
contour.
-
Cutting Edge.
Dual-honed, precision-ground beveled jaws (zero-gap aligned
mating
edges)
-
Lever Mechanism.
Arched, wide-body ergonomic lever for balanced thumb pressure
and
compact storage
-
Spring Action.
Self-tensioning tempered stainless steel body frame
(no separate leaf
spring required)
|
4. Standard OEM Dimensional Targets
(Verify/Finalize on CAD)
-
Overall Length.
~59 mm 65 mm (2.3" 2.55") for standard fingernail
size
(or ~79 mm 92 mm if scaling for toenail size)
-
Jaw Opening Width.
~2.5 mm 3.5 mm
-
Cutting Edge Width.
~11 mm 13 mm
-
Stock Thickness.
~1.5 mm 2.0 mm
-
Hardness Rating.
50 54 HRC (heat-treated cutting jaws)
-
Net Weight.
~22 g 30 g
5. OEM Quality Control & Compliance
Standards
-
Corrosion Resistance.
Pass 2449 hour neutral salt spray test (ASTM B117)
-
Cutting Performance.
Clean, tear-free cut across single-ply tissue and
1.0 mm nylon test
strip from corner to corner
-
Cycle Durability.
Minimum 10,000 actuation cycles with zero permanent
spring-back loss or
pin wobble
-
Sanitization.
Safe for ultrasonic cleaning, alcohol disinfections,
and autoclave
sterilization (100% all-metal construction)
-
Packaging.
Individual protective velvet/leatherette sleeve, blister
card, or
multi-piece rigid gift box insert
|
|
CAT. REF. #
SWAY-GPNC-102 |
|
IMAGE OF THE PRODUCT |
Product
Identification & Classification |
 |
Technical Specification Sheet
for
SWAY-GPNC-102
Wide-Jaw Lever Nail Clipper
Gold-Plated
|
-
Product Name:
Wide-Jaw Heavy-Duty Lever Nail Clipper (Podiatry /
Thick Nail Clipper)
-
Brand Marking:
SWAY-GPNC-102 (Laser-engraved on the upper lever arm)
-
Primary Application:
Fingernail & toenail trimming, thick/hard nails
-
Design Style:
Ergonomic hollow-cutout lever handle with riveted fulcrum pivot
2.
Materials &
Surface Finish
-
Body & Jaw Material:
High-Carbon Martensitic Stainless Steel grades 420J2, 420HC,
or 3Cr13/4Cr13
cold-forged/stamped spring steel)
-
Surface Coating.
Gold Titanium Nitride (TiN) PVD coating or Gold Electroplating
(High-gloss mirror finish)
-
Internal Spring:
Stainless steel leaf/wire return spring (Gold PVD /
electroplated to
match frame)
-
Pivot Pin / Rivet.
Solid stainless steel barrel rivet with recessed washers
(Gold-matched)
-
Fulcrum Pin.
Solid machined stainless steel T-bar / ball-head swivel pin
(Gold PVD /
electroplated to match body)
3. Structural & Mechanical Specifications
-
Jaw Profile.
Wide-opening curved crescent cutting edge
(angled at ~15°20° for
ergonomic visibility and access)
-
Cutting Edge.
Dual-honed, precision-ground beveled jaws
(flush-mating overlap or
butt-joint alignment)
-
Lever Mechanism.
Lever Mechanism.
High-leverage compound mechanical arm with
teardrop cutout to reduce
weight and improve grip control.
-
Tension & Return.
Integrated flat-wire tension spring riveted to the base plate
for
smooth, automatic jaw rebound
|
4. Standard OEM Dimensional Targets
(Verify/Finalize
on CAD)
-
Overall Length.
~95 mm 92 mm (3.35" 3.6")
-
Jaw Opening Width.
~2.5 mm 3.5 mm
-
Cutting Edge Width.
~14 mm 16 mm
-
Stock Thickness.
~1.5 mm 2.0 mm
-
Lever Thickness.
~2.5 mm 3.2 mm
-
Hardness Rating.
50 55 HRC (heat-treated cutting jaws for edge retention)
-
Net Weight.
~42 g 52 g
5. OEM Quality Control & Compliance
Standards
-
Corrosion Resistance.
Pass 2449 hour neutral salt spray test (ASTM B117)
-
Cutting Performance.
Clean, crush-free cut on 1.5 mm 2.0 mm
thick nylon/acrylic test rod
across full blade width
-
Cycle Durability.
Minimum 10,000 actuation cycles without spring
deformation or pivot
loosening
-
Sanitization.
Safe for ultrasonic cleaning, alcohol disinfections, and
autoclave
sterilization (all-metal construction)
-
Packaging.
Individual protective velvet/leatherette pouch, rigid gift
box, or blister card
|
CAT. REF. #
SWAY-GPNC-102A |
|
IMAGE OF THE PRODUCT |
Product
Identification & Classification |
 |
Technical Specification Sheet
for
SWAY-GPNC-102A
Heavy-Duty Barrel-Spring Toenail Nipper
Gold-Plated
|
1. General OEM Product Identification
-
Product Name.
SWAY Wide-Jaw Heavy-Duty
Fingernail & Toenail Clipper.(# SWAY-GPNC-102A)
-
Suggested SKU Reference.
NC-205-GD (Gold PVD) /
NC-205-SS (Brushed Stainless
Steel).
-
Design Architecture. Bionic /
Powder-Metallurgy (MIM) wide-mouth cutting head with an
open-frame ergonomic lever and internal coil-spring return
mechanism.
-
Target Application. Thick,
hard, or curved fingernails and toenails; professional
salon and consumer grooming.
2. Dimensions & Mechanical Specs
-
Overall Length.
88 mm 92 mm (Large / Heavy-Duty
size).
-
Maximum Jaw Opening.
12 mm 15 mm wide-mouth
clearance (standard clippers open
3 mm 4 mm).
-
Blade Width.
15 mm 16 mm curved cutting arc.
-
Unit Net Weight.
52 g 58 g (balanced solid MIM
steel construction).
-
Spring Mechanism. Internal
stainless steel torsion/coil spring housed between the
upper lever and lower chassis (25,000+
compression cycle rating).
-
Pivot Pin. Flush-riveted
stainless steel fulcrum axle (4.0
mm diameter) with zero lateral
wobble.
3. Materials, Heat Treatment & Surface
Finish
-
Core Material.
420J2 / 440C Surgical-Grade Stainless Steel
manufactured via Metal Injection Molding (MIM) for high
structural rigidity.
-
Blade Hardness. Vacuum
heat-treated to
52 56 HRC (Rockwell Hardness)
for long-term edge retention without chipping.
-
Cutting Edge Geometry.
Double-ground curved bevels (0.02
mm edge overlap offset to prevent
blade-on-blade dulling) with exposed raw satin steel
cutting faces for maximum sharpness.
-
Surface Coating.
Titanium Gold PVD (Physical Vapor Deposition)
over a satin-brushed stainless substrate
(scratch-resistant, hypoallergenic, non-tarnishing).
|
4. Private Label Branding & Packaging Specs (SWAY)
|
CAT. REF. #
SWAY-GPNC-103 |
|
IMAGE OF THE PRODUCT |
Product
Identification & Classification |
|
Technical Specification Sheet
for
SWAY-GPNC-103
Heavy-Duty Barrel-Spring Toenail Nipper
Gold-Plated
|
-
Product Name:
Heavy-Duty Podiatry / Toenail Nipper with Safety Catch &
Leaf Spring
-
Brand
Marking:
SWAY-GPNC-103 (Laser-engraved on the flat face of the
box-joint neck)
-
Primary Application:
Thick, hard, or ingrown toenail trimming and
professional
podiatry/pedicure care
-
Design Style:
Box-joint forged nipper with diamond-knurled ergonomic handles,
single
internal leaf spring, and rear hinged safety clasp
2.
Materials &
Surface Finish
-
Body & Jaw Material:
Drop-Forged Surgical Stainless Steel (Standard OEM grades:
420J2, 420HC, or 410/440C surgical cutlery grade)
-
Surface Coating.
Gold Titanium Nitride (TiN) PVD coating or Gold Electroplating
(High-gloss mirror finish on smooth surfaces; light satin/matte
texture
inside knurled grip)
-
Internal Spring:
Tempered stainless steel single leaf spring secured with a
flush
screw/rivet (Gold PVD / electroplated to match frame)
-
Spring Latch:
Hinged stainless steel rear locking bar/clasp (Gold-matched)
3. Structural & Mechanical Specifications
-
Jaw Profile.
Slightly curved, pointed precision nipper jaws designed for
controlled corner access and heavy-duty shearing
-
Joint Construction.
Precision-milled
Box Joint
(pass-through lap joint) to eliminate
lateral jaw wobble under high
cutting force
-
Cutting Edge.
Hand-honed, flush-mating beveled cutting edges
with tip-first closure
alignment
-
Lever Mechanism.
Lever Mechanism.
High-leverage compound mechanical arm with
teardrop cutout to reduce
weight and improve grip control.
-
Handle & Grip.
Contoured solid handles featuring
diamond-pattern knurling
on the
outer grip panels for non-slip wet/dry control
-
Locking Mechanism.
Integrated swing-arm safety latch at the handle base to keep jaws
securely closed during storage
|
4. Standard OEM Dimensional Targets
(Verify/Finalize on CAD)
-
Overall Length.
~125 mm 140 mm (5.0" 5.5")
-
Cutting Jaw Length.
~16 mm 20 mm (0.63" 0.90")
-
Jaw Opening Max.
~10 mm 14 mm
-
Box-Joint Thickness.
~7.0 mm 9.5 mm
-
Hardness Rating.
52 56 HRC (induction-hardened cutting edges)
-
Net Weight.
~95 g 110 g
5. OEM Quality Control & Compliance
Standards
-
Corrosion Resistance.
Pass 49-hour neutral salt spray test (ASTM B117)
-
Cutting Performance.
Clean, effortless cut through 2.0 mm 2.5 mm thick
acrylic/nylon
test
rod at both tip and base of jaws without jaw splay
-
Joint & Latch Durability.
Zero lateral play after 10,000 actuation cycles; rear
safety latch
holds
firm without accidental release
-
Sanitization.
Fully autoclavable (up to 134°C), ultrasonic-cleaner
safe, and hospital-grade disinfectant compatible
-
Packaging.
Protective silicone/PVC tip guard cap + individual
velvet pouch, rigid
gift box, or blister card.
|
CAT. REF. #
SWAY-GPNC-104 |
|
IMAGE OF THE PRODUCT |
Product
Identification & Classification |
|
Technical Specification Sheet
for
SWAY-GPNC-104
Double-Spring Ingrown Toenail / Precision Nipper
Gold-Plated
|
|
DESCRIPTION & TECHNICAL SPECIFICATION
-
Product Name:
Precision Ingrown Toenail & Corner Nipper (Double-Spring Box-Joint)
-
Brand
Marking:
SWAY-GPNC-104 (Laser-engraved on the flat face of the box-joint neck)
-
Primary Application:
Ingrown toenail corner trimming, nail edge detailing, and
heavy cuticle
work
-
Design Style:
Curved-tapered needle-tip jaws with box-joint construction, double
interlocking leaf springs, and fluted ergonomic handles
2.
Materials &
Surface Finish
-
Body & Jaw Material:
Drop-Forged Surgical Stainless Steel (Standard OEM grades: 420J2, 420HC,
or 410/440C surgical cutlery steel)
-
Surface Coating.
Gold Titanium Nitride (TiN) PVD coating or Gold Electroplating
(High-gloss
mirror finish)
-
Spring
Mechanism.
Dual tempered stainless steel leaf springs
riveted to each inner handle
with an interlocking notched tip (Gold PVD /
electroplated to match frame)
3. Structural & Mechanical Specifications
-
Jaw Profile.
Long, slender, Curved-angled pointed jaws (tapered tip for deep
nail-fold
and corner access)
-
Joint Construction.
Precision-milled
Box Joint
(pass-through lap joint) for rigid alignment and
zero lateral jaw play
-
Cutting Edge.
Hand-honed, flush-mating beveled blades with crisp tip-to-heel closure
-
Handle & Grip.
Contoured solid handles with
machined horizontal finger-grip flutes/grooves
along the outer spine for enhanced tactile control
-
Spring Action.
Balanced double-leaf spring assembly providing smooth, responsive
resistance and automatic jaw return
|
4. Standard OEM Dimensional Targets
(Verify/Finalize on CAD)
-
Overall Length.
~115 mm 130 mm (4.5" 5.1")
-
Cutting Jaw Length.
~14 mm 19 mm (0.55" 0.70")
-
Jaw Opening Max.
~9 mm 12 mm
-
Box-Joint Thickness.
~6.0 mm 7.5 mm
-
Hardness Rating.
52 56 HRC (induction-hardened cutting edges)
-
Net Weight.
~65 g 95 g
5. OEM Quality Control & Compliance
Standards
-
Corrosion Resistance.
Pass 49-hour neutral salt spray test (ASTM B117)
-
Cutting Performance.
Clean, snag-free cut on single-ply tissue at the extreme tip and
1.5 mm
nylon test rod across the full jaw length
-
Cycle & Spring Durability.
Minimum 10,000 actuation cycles with smooth interlocking
spring glide
and zero lateral joint wobble
-
Sanitization.
Fully autoclavable (up to 134°C), ultrasonic-cleaner safe, and
hospital-grade disinfectant compatible
-
Packaging.
Protective silicone/PVC tip guard cap + individual velvet pouch,
rigid
gift box, or blister card
|
CAT. REF. #
SWAY-GPNC-105 |
|
IMAGE OF THE PRODUCT |
Product
Identification & Classification |
|
Technical Specification Sheet
for
SWAY-GPNC-105
Professional Cuticle Nipper
a box
joint, and a double-leaf spring mechanism.
Gold-Toned Finish
|
|
DESCRIPTION & TECHNICAL SPECIFICATION
-
Product Type:
Professional Manicure/Pedicure
Cuticle Nipper (Skin Trimmer)
-
Brand
Marking:
SWAY-GPNC-105 (Laser-engraved on the flat face of the box-joint)
-
Joint Construction.
Box joint (interlocking
hinge design that prevents lateral blade wobble
and maintains long-term
cutting edge alignment)
-
Spring Mechanism.
Double-leaf spring (two
opposing metal plates screwed onto the inner
handles for smooth,
balanced tension and effortless rebound)
-
Primary Application:
Ingrown toenail corner trimming, nail edge detailing, and cuticle
work
2.
Materials &
Surface Finish
-
Body & Jaw Material:
Drop-Forged Surgical Stainless Steel (Standard OEM grades: 420J2, 420HC,
or 410/440C surgical cutlery steel)
-
Surface Coating.
Gold Titanium Nitride (TiN) PVD coating or Gold Electroplating
(High-gloss
mirror finish)
-
Spring
Mechanism.
Dual tempered stainless steel leaf springs
riveted to each inner handle
with an interlocking notched tip (Gold PVD /
electroplated to match frame)
3. Structural & Mechanical Specifications
-
Cutting Edge.
Hand-honed, flush-mating beveled blades with crisp tip-to-heel closure
-
Handle & Grip.
Ergonomically curved,
smooth-contoured handles for palm comfort and
controlled leverage
-
Spring Action.
Balanced double-leaf spring assembly providing smooth, responsive
resistance and automatic jaw return
-
Tip Profile.
Fine, pointed tips for precision trimming of
hangnails and non-living cuticle tissue
|
4. Standard OEM Dimensional Targets
(Verify/Finalize on CAD)
-
Overall Length.
~100 mm 105 mm (approx. 4 inches)
-
Cutting Jaw Length.
~ 5 mm 7 mm
(standard half-to-full jaw size for "105"
series professional nippers)
-
Jaw Opening Max.
~9 mm 12 mm
-
Box-Joint Thickness.
~6.0 mm 7.5 mm
-
Hardness Rating.
52 56 HRC (induction-hardened cutting edges)
-
Net Weight.
~45 g 65 g
5. OEM Quality Control & Compliance
Standards
-
Corrosion Resistance.
Pass 49-hour neutral salt spray test (ASTM B117)
-
Cutting Performance.
Clean, snag-free cut on single-ply tissue at the extreme tip and
1.5 mm
nylon test rod across the full jaw length
-
Cycle & Spring Durability.
Minimum 10,000 actuation cycles with smooth interlocking
spring glide
and zero lateral joint wobble
-
Sanitization.
Fully autoclavable (up to 134°C), ultrasonic-cleaner safe, and
hospital-grade disinfectant compatible
-
Packaging.
Protective silicone/PVC tip guard cap + individual velvet pouch,
rigid
gift box, or blister card
|
| |
How can we help you?
To discuss how our team can help & your
business achieve real results, please
Contact Us
|
The Swairah
Method for Project & Program Management:
An effective application of the PMBOK
standards specifically designed to strike the right balance between
achieving project milestones and supporting organizational change. |
|
The motivational interviews, the
understanding and interpreting, the documentation just couldn't be
better. I want to thank you for conveying such a great feeling of being
part of a big, big change for the better for our company. We are
certainly moving in the right direction." |
|
Nothing takes the place of doing something. |
|